Mi-Glow® 800 fluorescent yellow/green particles premixed with powdered Wetting Agent 34 for use in water media.
It is designed to be used with a UV-A light to detect very fine discontinuities in finished products. Wetting Agent 34 is low foaming and has excellent wetting characteristics.
Physical Characteristics: Forest green powder with a slight detergent odor.
Typical Properties: (Not a specification)
|Particle Color||Fluorescent Yellow/Green|
|Average Particle Size||5 µm|
|Temperature Range||32-120°F (0-49°C)|
|*Representative of the number of lines shown on an AISI 01 Ketos tool steel ring as defined in SAE AS5282|
Preparation: The change-over from a solvent system to a Mi-Glow® 778 system requires a thorough cleaning of the tank and piping. This can be accomplished in most cases by flushing the system twice, using about 1/2 gallon of Cleaner 500 and 10-15 gallons of water. Flushing should be followed by a water rinse.
Mi-Glow® 778 should be used at a dilution of 1 part concentrate with 39 parts of water. This will give a fluorescent particle concentration of 1.3 grams per liter. The recommended proportion may vary depending on specific applications. Each bottle should be thoroughly mixed before using. If a bottle is emptied, it should be rinsed with water and the contents added to the system.
Specification Compliance: Particles meet all relevant industry specifications, including but not limited to ASTM E 1444, AMS 3044, MIL-STD-271, NAVSEA 250-1500-1, NTR-1E.
Shelf Life: Four (4) years, when closed containers are stored in a clean, dry environment away from excessive heat and cold.
Part Number and Container Size: