Stroud Systems Inc. Header

Digital Pit Gauges

DPG 2 Digital Pit Gauge

PG-D1 Digital Pit Gauge

The PG-D1 is a unique Pit Gauge, based on a Direct Reading Digital Vernier Caliper.

The PG-D1 is easy-to-use and provides fast and accurate measurements of surface pits, gauges, dents, undercut, etc.

The PG-D1 is made in hardened stainless steel and its 0.050" (1.2 mm) diameter probe, will access even the smallest pits.

  • Waterproof Seal
  • MM/IN - Switch between mm and inch measurements
  • ON/OFF - Now just move the slide to turn unit On/Auto/Off
  • ZERO - Set "0" at any position
Specifications: inch mm
Range 1.25 30
Resolution 0.0004 0.01
Permissible Error ±0.001 ±0.03
DPG 3 "Enhanced" Digital Pit Gauge

PG-D2 Enhanced Digital Pit Depth Gauge

The New Improved Digital Pit and Depth Gauge

Technical Data:

  • Range: 0 - 125" (0-30mm)
  • Resolution: 0.001 (0.025mm)
  • Accuracy: ± 0.001" (0.025mm)
  • Protection: IP-54
  • Temperature Range: 32 - 105°F (0-40°C)
  • Relative Humidity: 80%
  • Storage Temperature: 14 - 140°F (-10-60°C)
  • Power: One 1.55V Button Battery
  • Base: 2 3/8" and 4 7/8" (60 and 125mm)

Pricing Includes:

  • Plastic Storage Case
  • Spring Loaded, digital depth gauge with sharp pointed tip
  • Standard 2 3/8" wide base
  • Two Position 4 7/8" wide base
  • Two sets of attachment screws

 
DPG 3 "Enhanced" Digital Pit Gauge
DPG 3 "Enhanced" Digital Pit Gauge
DPG 3 "Enhanced" Digital Pit Gauge
DPG 3 "Enhanced" Digital Pit Gauge