Stroud Systems Inc. Header
Magnaflux Logo
AUTHORIZED SERVICE CENTER
Magnaglo® 14AM Prepared Oil Bath by Magnaflux®

Magnaglo® 14AM Prepared Oil Bath

14AM is a fluorescent prepared bath of 14A powder mixed with Carrier II (a high flash point petroleum vehicle). Ready to use without measuring and mixing.

Applications: Magnaglo® 14AM is used to locate fine surface and slightly subsurface discontinuities such as inclusions, seams, shrink cracks, tears, laps, flakes, welding defects, grinding cracks, quenching cracks, and fatigue cracks.

Composition: Magnaglo® 14AM is a prepared, ready to use bath composed of 14A fluorescent powder and Carrier II (Oil Petroleum Vehicle).

Typical Properties (Not a specification)

  14AM
Color Under White Light Brown
Color Under Black Light Yellow-Green
Mean Particle Size 6 Microns
SAE Sensitivity 8 - 9
Settling Volume 0.30 - 0.40 ml
Temperature Limit 55 - 120?F Maximum

Bath Preparation: 14AM (oil based): 14AM is ready to use from the container.

Method of Application: 14AM: Shake can well to suspend the particles. If using bulk 14AM, shake or stir material to ensure uniform particle dispersion and pour into tank or vessel. Spray or pour onto properly magnetized test part, making sure that the entire surface to be inspected is covered. Inspect part. Indications will form immediately and appear as fluorescent green lines under a UV Black Light of 365 nm.

Note: Exposing 14AM to a strong magnetic field may adversely affect particle redistribution. 14AM should always be stored away from magnetizing equipment. Age and/or exposure to elevated temperatures can adversely affect the particle dispersion properties of 14AM and 14A Aqua-Glo in aerosol cans. As such, we recommend verifying proper concentration of the product by performing a sensitivity check using a QQI or other known test standard prior to inspection.

Post Inspection Cleaning: The parts must be properly demagnetized before cleaning to ensure ease of particle removal.

Specification Compliance: 14AM: DOD-F-87935, AMS-3045, AMS-3046 (aerosol package only), ASTM E 1444, Cummins IS-16048-13, MILSTD-2132, ASTM E709(E-138), Boeing PS 21201, British Std. B.S. 4069.

Part Number and Container Size:

  • 01-0145-78: Case of 16 fl. oz. Aerosol Cans (12)
  • 01-0145-40: 5 Gallon Pail
  • (Product Data Sheet) Date: September 2014
    Aerosol Product SDS Revised June 9 2015 Version 1.2
    Bulk Product SDS Revised March 29 2015 Version 1.1