Stroud Systems Inc. Header
Parker Research Logo

Parker Research Yokes, Coils, Power Pack Inspection Units


Parker Research DA 200 AC / DC yoke

 

DA-200 Contour Probe

The DA-200 Contour Probe is a portable, self-contained instrument designed to produce a magnetic field on or within ferro-magnetic materials.

The selective AC and pulsed DC functions are built into a single reliable instrument. The AC mode produces an intense AC field for detection of surface defects and demagnetizing after inspection. The DC mode produces an intense pulsed DC field for detection of some subsurface defects.

Parker Research A 210 AC Yoke

 

A-210 Heavy Duty Superlift

The AC mode produces an intense A.C. field for detection of surface defects and demagnetizing after inspection. Combined with the flexibility of articulating legs and a rugged molded housing, the Contour Probe can be used on nearly any part or surface contour... in the lab, factory, or field site.

 

DA400 - Contour Probe

The DA-400 Contour Probe is a portable, self-contained instrument designed to produce a magnetic field on or within ferro-magnetic materials.

The selective AC and pulsed DC functions are built into a single reliable instrument. The AC mode produces an intense AC field for detection of surface defects and demagnetizing after inspection. The DC mode produces an intense pulsed DC field for detection of some subsurface defects.

Parker Research Probe / Yoke Kits

Contour Probe Kits

Parker Research Yoke / Probe Kits now come in 2 different style cases one is Steel and the other is a Super tuff plastic material.


There are two different style of Kits. The Kit "A" contains the basic items that are needed to perform Visible Inspections. The Kit "AB" is the same as the Kit "A", plus a aerosol can of fluorescent particles and a small Black light


Please click on the above "Contour Probe Kits" link to review the complete packages and options.

Parker Research B 100 AC Yoke

B-100 Contour Probe

The instrument that does so much, so well. If you do any work with ferrous metals, shipyard, aerospace??steel mill, foundry, weldments or vehicle overhaul, you need the performance advantage of the B-100 Contour Probe.


Wide Versatility, Mechanically, the B-100 Probe will conform to practically any surface configuration. Strong, constant AC fields or high intensity pulsed DC fields, using the DC-300 power supply.

Parker Research B 300 Yoke

B-300 Contour Probe

The B-300 Contour Probe is a lightweight (7 1/2 pounds), Magnetic Inspection Yoke designed to perform Magnetic Particle inspections quickly and reliably.


As with the other popular Parker Probes the B-300 has fully adjustable legs which allow the strong AC field to be applied directly to the precise area to be inspected, regardless of part size or mass.

Parker Research B 310 AC Yoke

B 310 Contour Probes

The B-310 Contour Probe is a lightweight (6 lbs.) Magnetic Inspection Yoke designed to perform magnetic particle inspections quickly and reliably, and with greater versatility. The overall length of the unit is only 7.25".


The B-310 Mini Contour Probe provides great flexibility and reduced size.

P-2 Series Contour Probes

The Instrument that does so much, so well If you do any work with ferrous metals.... in the shipyard, aerospace, steel mill, foundry, weldments or vehicle overhaul... you need the performance advantage of the P-2 Contour Probe.


The ergonomic, light-weight design is extremely comfortable and reduces stress on the operator. This new style allows for an excellent grip in a variety of testing conditions.

BAC-310 Battery / Inverter

The BAC-310 operates independently from any outside power source. Power is derived from the internal 12 VDC battery, which is inverted to 110 VAC output through the inverter circuitry. A separate battery charger is provided for overnight charging of the battery. The entire unit is contained within a heavy-duty steel case with dimensions 11" H x 7" W x 5" D and weighs only 28 pounds.


Plug any of the Parker AC series Contour Probes (Yokes) into the AC outlet. Follow operating instructions for the individual Probe for correct and normal AC Yoke inspection techniques and requirements.

PM-50 Permanent Magnetic Yoke Set by Parker Research


 

PM 50 Permanent Magnetic Yoke Set

For magnetic particle inspection applications (where applicable) certified for 50 lbs. weight-lift test.

PM-50 Kit A Permanent Magnetic Yoke Set by Parker Research


PM 50 Kit "A", Permanent Magnetic Yoke Set with Kit "A" Items

  • PM-50 Permanent Magnetic Yoke Set
  • Plastic carrying case
  • PB-1 Powder Applicator
  • 1 lb each of red and gray dry inspection powder

Parker Research Coils

Parker Research Coils

Parker portable magnetizing coils are designed for magnetic particle inspection of ferrous metal parts. The new coils allow for the use of either dry powder or wet fluorescent inspection media and may be used for demagnetizing as well.


The coils are designed for a 50% duty cycle, and are equipped with thermal overload protection. Both the PL-10 and the PL-8 operate from a standard 115 VAC, 60 Hz power source. The PL10S and PL8S operate from a 230VAC, 50-60 Hz power source


Parker Research Hi Amp Portable Units


DA 750 Portable Magnetic Inspection Unit

The Parker Research DA-750 heavy duty portable magnetic inspection unit provides high output AC or HWDC fields for magnetic particle inspection. Field selection is determined by using the appropriate field cable connector.


Current output is infinitely variable from zero to maximum by use of the current control located on the front panel, and is indicated by the panel meter. Actual current output is determined by cable size and length. AC magnetic fields offer the best sensitivity for detection of surface defect indications.

DA 1500 Portable Magnetic Inspection Unit

The Parker Research DA-1500 portable heavy duty magnetic inspection unit provides high output AC or HWDC fields for magnetic particle inspection. Field selection is determined by using the appropriate field cable connector.


Current output is infinitely variable from zero to maximum by use of the current control located on the front panel, and is indicated by the panel meter. Actual current output is determined by cable size and length.

Parker Research DA 1500 DR Power Pack

DA 1500 DR Portable Magnetic Inspection Unit

The Parker Research DA-1500-DR portable heavy duty magnetic inspection unit provides high output AC or HWDC fields for magnetic particle inspection. The new Digital LCD display is easy to read in any light condition. Overall accuracy has been enhanced thanks to a new circuit design. This new feature is extremely durable and backed by Parker's one-year warranty.


Current output is infinitely variable from zero to maximum by use of the current control located on the front panel, and is indicated by the panel meter. Actual current output is determined by cable size and length.

TR 700 Transport Truck

TR 700 Transport Truck for Heavy Duty Portable Magnetic Inspection Units for use with the DA 750 or DA 1500 Portable Magnetic Inspection Units