Stroud Systems Inc. Header
Parker Research Logo

Parker Research Inspection Tools and Accessories

PM-50 Permanent Magnetic Yoke Set by Parker Research

PM 50 Permanent Magnetic Yoke Set

For magnetic particle inspection applications (where applicable) certified for 50 lbs. weight-lift test.

PM-50 Kit A Permanent Magnetic Yoke Set by Parker Research

PM 50 Kit "A", Permanent Magnetic Yoke Set with Kit "A" Items

  • PM-50 Permanent Magnetic Yoke Set
  • Plastic carrying case
  • PB-1 Powder Applicator
  • 1 lb each of red and gray dry inspection powder

TB-10 Magnetic 10lb Weight Lift Test Bar by Parker Research

Magnetic Weight Lift Test Bars, 10 Lb Bar

Provides for the calibration and certification of Magnetic Particle Inspection Yokes. Bar weight is stamped on each bar and is traceable to NIST.

TB-10 set of 4 Magnetic 10lb Weight Lift Test Bars by Parker Research

Magnetic Weight Lift Test Bar Set of 4

Set of 4 10 Lb Lift Bars provides for the calibration and certification of Magnetic Particle Inspection Yokes (Bolt is supplied to bolt all 4 together to perform a 40 Lb lift test). Bar weight is stamped on each bar and is traceable to NIST.

TB-10 set of 5 Magnetic 10lb Weight Lift Test Bars by Parker Research

Magnetic Weight Lift Test Bar Set of 5

Set of 5 10 Lb Lift Bars provides for the calibration and certification of Magnetic Particle Inspection Yokes (Bolt is supplied to bolt all 5 together to perform a 50 Lb lift test). Bar weight is stamped on each bar and is traceable to NIST.

B-10SP Magnetic 10lb Weight Lift Test Bar with Artifical Defects by Parker Research

TB 10SP Special Magnetic Weight Lift Test Bar with Artificial Defects

The TB-10SP Magnetic Weight Lift / Defect Test Bar provides for the 10 lb AC weight lift calibration of Magnetic Particle Inspection Yokes. In addition the reverse side of the TB-10SP bar contains artificial defects as indicated above. Demonstration of actual defect indications is very useful for visual and operational performance purposes.

NA-16 Notch Defect Test Bar by Parker Research

NA-16 Notch Defect Test Bar

The NA-16 Notch Test Bar complies with the requirements of MIL-STD-271E and F (Ships), paragraph 4.3.1.2, and NAVSEA-TB-T9074-AS-GIB-010/271. The procedure specifies an inspection with the ability to detect the smallest rejectable surface defects, artificial or natural, in a test specimen.

Y-300 and Y-400 Molded Induction Yoke Lights by Parker Research
Y-300, Y-400 Yokes Lights, Y-300 Molded Induction Yoke Light for B-300 series Contour Probes Y-400 Molded Induction Yoke Light for DA-400 and B-100 Contour Probes
YP-20 Molded Induction Yoke Lightfor P2 Yoke by Parker Research

Yoke Light for P-2 series Contour Probes

MG 25 Magnetic Field Indicator by Parker Research

MG-25 Magnetic Field Indicator, all MG-25 Magnetic Field Indicators can be certified in accordance with ASTM E1444. Calibration includes readings taken at three points in each range and each polarity including zero.

MG-50 Magnetic Pie Gauge by Parker Research by Parker Research

MG 50 Pie Gauge, The price of this field indicator includes its case and also includes certification of the instrument.

Flux Indicators, Burma Castrol Strips

Flux Indicators, Burma Castrol Strips

  • MG-01 and MG-02 Field Flux Strips MG-01 Field Flux Strip (Burma Castrol) Type I or G for General use.
  • MG-02 Field Flux Strip (Burma Castrol) Type II or A for Aircraft use.

Ketos Ring by Parker Research

Ketos Test Ring, AS 5282 Certified