The PD-3000 Series of gages inspects the depth of surface pitting. Each model of the PD-3000 gage includes the gage base, an indicator with .001" resolution, and a standard TPD .375" long contact point with a .020" end radius. This sharp point contact is capable of reaching deep into surface pits and cracks. The gage can measure depths up to .450" deep with the standard TPD contact point.
Before measurement, it is important to zero the gage indicator while resting the gage on a flat surface. Placing the gage´s contact point into the defect provides an actual measurement reading of the surface pitting. The PD-3000 gage is supplied with a .001" resolution indicator.
The gage also accepts other types and sizes of contact points for use in other applications, such as groove and thread depth inspection.
Select the PD-3000 gage model based on the type of indicator required.
|.250" (6.35 mm)||Standard||Pit Depth Gage, AGD #1, 0-100||PD-3003|
|.450" (11.43 mm)||Standard||Pit Depth Gage, AGD #2, 0-100||PD-3004|
|.450" (11.43 mm)||Flat Base||Pit Depth Gage, AGD #2, 0-100||PD-3005|
|.450"(11.43 mm)||6" Long Flat Base||Pit Depth Gage, AGD #2, 0-100||PD-3006|
|.450"(11.43 mm)||6" Long V Base||Pit Depth Gage, AGD #2, 0-100||PD-3007|
AGD#1 = Dial approximately 1.75"
AGD#2 = Dial approximately 2.25"