Magnaflux Logo
AUTHORIZED SERVICE CENTER

Magnaglo® 14A Aqua-Glo™ Water Based Aerosols


Magnaglo® 14A Aqua-Glo™ is a prepared liquid solution composed of 14A fluorescent powder, water, conditioning agents and carbon dioxide propellant. This product is designed to offer the benefits of water and the convenience of an aerosol and may be used right out of the aerosol can.

APPLICATIONS: Magnaglo® 14A Aqua-Glo™ is used to locate fine surface and slightly subsurface discontinuities such as inclusions, seams, shrink cracks, tears, laps, flakes, welding defects, grinding cracks, quenching cracks, and fatigue cracks.

COMPOSITION: Magnaglo® 14A Aqua-Glo&™ is a prepared liquid solution composed of 14A fluorescent powder, water, conditioning agents and carbon dioxide propellant. This product is designed to offer the benefits of water and the convenience of an aerosol and may be used right out of the aerosol can.

TYPICAL PROPERTIES (Not a specification)

  14A AQUA-GLO™
Color Under White Light Brown
Color Under Black Light Yellow-Green
Mean Particle Size 6 Microns
SAE Sensitivity 7
Settling Volume 0.15 - 0.30 ml
Temperature Limit 32 - 120?F Maximum

BATH PREPARATION: 14A Aqua-Glo™ (water based): 14A Aqua-Glo is ready to use from the container.

METHOD OF APPLICATION: 14A Aqua-Glo™: Shake can well to suspend the particles. Spray onto properly magnetized test part, making sure that the entire surface to be inspected is covered. Inspect part. Indications will form immediately and appear as fluorescent green lines under a UV Black Light of 365 nm.

Note: Exposing 14A AQUA-GLO™ aerosol cans to a strong magnetic field may adversely affect particle redistribution. 14A AQUA-GLO™ aerosol cans should always be stored away from magnetizing equipment. Age and/or exposure to elevated temperatures can adversely affect the particle dispersion properties of 14A AQUA-GLO™ in aerosol cans. As such, we recommend verifying proper concentration of the product by performing a sensitivity check using a QQI or other known test standard prior to inspection.

POST INSPECTION CLEANING: The parts must be properly demagnetized before cleaning to ensure ease of particle removal.

SPECIFICATION COMPLIANCE: 14A Aqua-Glo™ ASTM E1444, ASME, ASTM E709, NAVSEA 250-1500-1, MIL-STD-2132.

Part Number and Container Size:

  • 01-1725-38: Case of 265 gram Aerosol Cans (12)
  • (Product Data Sheet) Date: July 2014
    Product SDS Revised June 9 2015 Version 1.1