Stroud Systems Inc. Header
Parker Research Logo
DA 750 Power Pack by Parker Research

DA-750 Heavy Duty High Amp Portable Magnetic Inspection Unit

The Parker Research DA-750 heavy duty portable magnetic inspection unit provides high output AC or HWDC fields for magnetic particle inspection. Field selection is determined by using the appropriate field cable connector.

Current output is infinitely variable from zero to maximum by use of the current control located on the front panel, and is indicated by the panel meter. Actual current output is determined by cable size and length. AC magnetic fields offer the best sensitivity for detection of surface defect indications.

750 AMP OUTPUT: Operates from either 115 VAC, 1P or 230 VAC, 1P (must be specified (When Ordering). The AC field is also beneficial for demagnetizing after inspection.

Half-Wave DC magnetic fields provide for the detection of certain subsurface defect indications. DC fields penetrate a cross section of the test area rather than just the surface. Optional magnetizing cables can be equipped with prods for circular magnetization. The cables can be wrapped around parts to form a coil for longitudinal magnetization. Demagnetization is accomplished in a similar manner.

Compare Specifications

Model Model DA-750 Model DA-1500 Model DA-1500-DR
 
Length 17 1/2" (44.5 cm) 21 5/32 " (54.9 cm) 21 5/32 " (54.9 cm)
 
Width 9 1/16" (23 cm) 9 11/32" (23.7 cm) 9 11/32" (23.7 cm)
 
Height 7 13/16" (19.8 cm) 9 17/32" (24.2 cm) 9 17/32" (24.2 cm)
 
Maximum output current ratings based on the use of two 15-foot lengths of 4/0 cable 750 amps,
AC or HWDC
1500 amps,
AC or HWDC
1500 amps,
AC or HWDC
 
Line Voltage single phase 115 VAC, 50/60 Hz
230 VAC, 50/60 Hz
230 VAC, 50/60 Hz
460 VAC, 50/60 Hz
230 VAC, 50/60 Hz
460 VAC, 50/60 Hz
 
Line current 26 amps @ 115 VAC
13 amps @ 230 VAC
45 amps @ 230 VAC
23 amps @ 460 VAC
45 amps @ 230 VAC
23 amps @ 460 VAC
 
Maximum duty cycle 50% 50% 50%
 
Unit weight 35 lbs. (15.9 kg) 93 lbs. (42.2 kg) 93 lbs. (42.2 kg)

Portable Magnetic Inspection Units Cables and Accessory Items

(Product Operating Instructions) Date: March 2013