Digital Pit Gauges
PG-D2 Digital Pit Gauge
The PG-D2 is a unique Pit Gauge, based on a Direct Reading Digital Vernier Caliper.The PG-D2 is easy-to-use and provides fast and accurate measurements of surface pits, gauges, dents, undercut, etc.
The PG-D2 is made in hardened stainless steel and its 0.050" (1.2 mm) diameter probe, will access even the smallest pits.
- Waterproof Seal
- MM/IN - Switch between mm and inch measurements
- ON/OFF - Now just move the slide to turn unit On/Auto/Off
- ZERO - Set "0" at any position
| Specifications: | inch | mm |
|---|---|---|
| Range | 1.25 | 30 |
| Resolution | 0.0004 | 0.01 |
| Permissible Error | ±0.001 | ±0.03 |
PG-D3 Enhanced Digital Pit Depth Gauge
The New Improved Digital Pit and Depth GaugeSpecifications:
- Range: 0 - 125" (0-30mm)
- Resolution: 0.001 (0.025mm)
- Accuracy: ± 0.001" (0.025mm)
- Protection: IP-54
- Temperature Range: 32 - 105°F (0-40°C)
- Relative Humidity: 80%
- Storage Temperature: 14 - 140°F (-10-60°C)
- Power: One 1.55V Button Battery
- Base: 2 3/8" and 4 7/8" (60 and 125mm)
- Plastic Storage Case
- Spring Loaded, digital depth gauge with sharp pointed tip
- Standard 2 3/8" wide base
- Two Position 4 7/8" wide base
- Two sets of attachment screws
- Two sets of attachment screws
Pricing Includes:
